Home > Beer Equipment >

Cannular Bench Top Can Seamer CAN100
Cannular Bench Top Can Seamer


 
$599.99

Product Code: BMCAN100
Qty:

Description
 

The Cannular is a manual can seamer that is easy to use, reliable, and beautifully simple.


Whether you're a brewery looking to offer canned beer to go or a homebrewer wanting to keep your creations fresh and fully protected from light, the Cannular is the answer. This bench top unit is one of the most compact and easy to use can seamers you'll find. The Cannular only requires one person to operate, and each can takes roughly 5 seconds to seam. With a two-person team, one filling and one seaming, the Cannular becomes a suitable option for nano breweries doing small canning production runs.
The Cannular's table spacer is specifically designed to work with 500ml (16.9 oz) Can Fresh aluminum cans (CAN150). 330ml (11.2 oz) Can Fresh cans are also available (CAN133), but you will need the correct table spacer to use them with the seamer (CAN103). We have tested standard 202 cans and have been able to achieve good seals with proper adjustments. It is necessary to adjust the table height to ensure you have the appropriate amount of pressure applied when the can lift is raised.
Operation:
The beauty of the Cannular lies in how truly simple it is to operate. With only three points of operation, it only takes a few minutes to familiarize yourself with the machine. The seaming process is as follows:
  • Place lid atop the can and place the can on the table spacer
  • Turn the platform lever clockwise to raise the can to the seamer
  • Press the button to turn the machine on and begin spinning the can
  • Push the seaming lever away from you and hold for 1-2 seconds
  • Pull the seaming lever towards you and hold for 1-2 seconds
  • Press the button to turn off the machine and stop spinning the can
  • Turn the platform lever counterclockwise to lower the can

That's all there is to it!


Share your knowledge of this product. Be the first to write a review »